| Reference |
Description |
| 020049 |
Voith CLUPAC system, year 1984, width
of paper at pope reeler: 2520mm, speed maximum: 600 m/min,
band width: 3000mm. |
| 020048 |
Four roll soft nip calender, face
width 3050mm. |
| 020047 |
Kusters single nip calender, top roll
762mm x 3860mm, bottom roll 559mm x 3860mm. Bearing centres
4521mm. Includes Farrel Kusters hydraulic pumping package
and Pabco hydraulic pack for roll pressure. No cooling
system: this was replaced with an impact system to change
the diameter of the rolls in zones. |
| 020046 |
Embossing calender width 1520mm with
shaftless unwinder for paper reels diameter 1500mm, Horton
brakes, paper web guide, shear Tidland circular knives
for trimming, shaftless winder for 1500mm diameter reels,
DC Reliance drive, machine installed and rebuilt in 2005. |
| 020045 |
Officine Meccaniche Colombo M139 Embossing
Calender, year 1999, sheet width range: maximum 1050mm,
minimum 700mm, basis weight range 70-300gsm, operating
speed maximum 250 m/min, unwind diameter maximum 1000mm,
rewind diameter maximum 1000mm, embossing roll diameter
230mm/290mm, press roll diameter 460mm/580mm, winding
shaft diameter 70mm, 150mm and 152mm,seven gravure types. |
| 020044 |
Kleinwefers Negra Embossing Calender,
year 1974, sheet width range: maximum 1350mm, minimum
500mm, basis weight range 70-350gsm, operating speed maximum
150 m/min, unwind diameter maximum 900mm, rewind diameter
maximum 900mm, embossing roll diameter 335mm, press roll
diameter 720mm, winding shaft diameter 76mm,150mm, seven
gravure types. |
| 020043 |
Warche electric-mechanic Embossing
Calender, year 1970, sheet width range: maximum 1340mm,
minimum 1130mm, basis weight range 70-350gsm, operating
speed maximum 120 m/min, unwind diameter maximum 1000mm,
rewind diameter maximum 1000mm, embossing roll diameter
225mm, press roll diameter 460mm, winding shaft diameter
70mm,150mm, thirteen gravure types. |
| 020042 |
Pizzolato GP-1 Embossing Calender,
year 2002, sheet width range: maximum 1470mm, minimum
900mm, basis weight range 70-300gsm, operating speed maximum
250 m/min, unwind diameter maximum 1250mm, rewind diameter
maximum 1250mm, embossing roll diameter 220mm/372mm, press
roll diametre 400mm/740mm, winding shaft diameter 150mm,
five gravure types. |
| 020041 |
Kleinwefers Embossing Calender, face
1900mm wide, manufactured in Germany in 1968, model K80. |
| 020039 |
Kleinwefer supercalender, drive on
right from unwind, year 1963, rebuilt with new drive 1995,
face 3300mm, 12 rolls, mix of rolls chilled steel, paper
? cotton filled bowls and synthetic rolls, A/F bearings,
hydraulic loading, lift front and rear for tail feeding,
four steam heated rolls, auto roll lift for breaks, speed
600 m/min,, driven unwind and rewind. |
| 020038 |
Eck
Haubold 16 roll supercalander, year 1970, working width
1400mm, maximum speed 300 m/min, linear load 91-337
kg/cm, drive 277 kW, connected load 500V. |
| 020036 |
Hunt and Moscrop Kuster calender,
roll face 3000mm, centres 3601mm, Kuster roll 450mm diameter,
drive roll 380mm diameter, includes power pack and doctors. |
| 020035 |
Bruderhaus supercalender, year 1980,
roll face 3200mm, maximum speed 900 m/min, 12 rolls. Drive
power 670 kw. |
| 020034 |
Bruderhaus supercalender, year 1968,
roll face 3200mm, maximum speed 700 m/min, 12 rolls. Drive
power 500 kw. |
| 020031 |
Kleinewefers lab soft-compact calender:
for boards, coated and uncoated paper with basis weight
of 40-300gsm.Width on face: flexitherm roll 550mm, paper
rolls 450mm. Working width 350mm. Core diameter; inside
76mm, outside 100mm. |
|
