| Reference |
Description |
| 070119 |
Centrifuge: type NX4500. |
| 070118 |
Voith thickener, year 1968, width
3200mm, speed 10 - 40 m/min, maximum capacity 60 tons/day,
inlet consistency 3% - 5%, outlet consistency 35% - 40%. |
| 070117 |
Three Andritz wire presses in stainless
steel. |
| 070116 |
Hedemora Disc Filter VDF 5.2 x 16
discs, capacity 300 ADTPD, year 1989, freeness, ml CSF:
60 (min), inlet consistency %: 0.45, outlet consistency
% 10 (min), cloudy filtrate, mg/l: 400 (max), clear filtrate,
mg/l: 50 (max), super clear filtrate, mg/l: 30 (max),
air content in pulp, % :1 (max). |
| 070115 |
T316L Stainless steel Krofta Supracell
clarifier model SPC22 using combined settling and floatation
techniques. Designed for approximayely 264 cubis metres
/ hour. With rotating spiral scoop, size 1000 air dissolving
tube rated for 260 gpm, and pump. Year 1991. |
| 070114 |
Maule diperging unit 75 t/day, year
1989, with six inclined screw thickeners type MB-70/1,
one collecting screw typr AISI, one disperger GR-111-/K/4,
one press type M-81/SL. |
| 070112 |
Bellmer sludge press: wire width 1200mm,
built in 1983, capacity: 15 m3/hr sludge, dry content
1t/hr, inlet sludge consistency up to 5%, outlet consistency
depending of inlet consistency. |
| 070111 |
Krofta SPC 22including air dissolving
tube and pump new in 1992, flow rate 1160 gpm, material
SS 304. |
| 070109 |
Andritz belt press (Sernagiotto,Italy)
, width 2000mm with feed from a pre thickener fabric covered
rotating drum. |
| 070108 |
Two Andritz Dupps horizontal screw
presses: model 3600 series, year 1991, dryness achieved
: 50%. |
| 070107 |
Krofta Supercell model SPC55, year
1982, sectional bolted tank, two SDA units and two compressors
for saturated air supply. |
| 070106 |
Krofta SPC22, stainless steel, year
1991, diameter 6700mm, height 6700mm, capacity 264 m3/hr. |
| 070104 |
Krofta Supercell SPC18, stainless
steel, diameter 5500mm, height 5500mm, capacity 180 m3/hr. |
| 070103 |
Krofta Supercell SPC6, stainless steel,
diameter 1850mm, body height 755mm, capacity 16 m3/hr. |
| 070102 |
Krofta SPC 6 system. |
| 070098 |
Krofta Tecexsa: stainless steel, capacity
120 m3/hr, installed 1995, with control panel. |
| 070097 |
Centrifugal sludge Pieralisi model
M1, installed 1998, capacity 1.4kg/dm3, without power
motor. |
| 070096 |
Andritz pre-thickening wire drain
tables with stainless frames. The drain tables pre-thicken
sludge prior to a screw press. |
| 070095 |
Cellwood screw press for thickening,
type RR550, year 1987, including motor 75kW and
gearbox, coupling etc. |
| 070094 |
Serganiotto
band filter BPF 1200, capacity 30m3/hr at 25-35%,
stainless
steel, installed 1999, with motor. |
| 070093 |
Two
Kvaener Hymac Inc. twin wire presses , 2160mm wide,
year 1997 and 1998.
One Andritz-Ruthner
twin wire press, 2160mm wide, year 1998. |
| 070092 |
Two Bellmer angle presses, model 2V,
year 1979, one with 8 rolls the other with 14 rolls. Web
width 1700mm, web lengths 13800 / 18300mm. |
| 070089 |
Thune SP45L scew press with Falk
gear and motor: height 1159mm, length 4160mm, width 950mm.
Net weight: 3200 kg, nominal capacity: 120 BDM T/day.
|
| 070088 |
Two Sunds hydrasieves size 72"
wide, slot size 0.07, material: all stainless steel. |
| 070082 |
Thune SP70L screw press, capacity
300 t/day, consistency in 4% - 5% (depending on the pulp),
consistency out 30% - 35% (depending on the pulp). |
| 070081 |
Sprout Bauer screw press, type 575
18-3, motr power rate 45 kw, motor speed 1470 rpm, capacity
maximum 160 t/day, inlet consistency 4.5%, outlet consistency
30%, stock temperature 70 - 75 deg C. |
| 070078 |
Drum
thickeners:
1. width
5600mm, diameter1200mm, 380V / 1450 rpm / 7.5kw,
2. width
2800mm, diameter1200mm, 380V / 1445 rpm / 5.5kw. |
| 070075 |
Sunds DWA 729 twin roll press, production
rate between 250 and 335 tons / day. Inlet consistency
7.5 - 8.0%, outlet consistency approximately 30%. Year
of make: 1985. |
| 070074 |
Andritz disc filter 8 x 3660mm. |
| 070073 |
Black Clawson DNT(Dynamic) washer,
model 200. All stainless steel construction. Used for
news-news washing, ledger-to-tissue and ledger-to-fine
paper washing applications. Speed 3000 ft/min up to 15%
cnsistency maximum. Includes screw conveyor. Wire width
75.25". |
| 070071 |
Andritz twin wire press,width 1600mm,
capacity 70 t/day, inlet consistency 3%, outlet consistency
30%. |
| 070012 |
OMC FOR MICRO SCREENING, FLOATATION
CIRCULAR OR RECTANGULAR DESIGN, SELF CLEANING SAND FILTERS
,FULL DETAILS ON INFO@OMC-COLLAREDA.COM |
|
