John Wilkie Paper Mill Services
 
Home About us Products Enquiry Form Contact us
 
         
 
Product Menu
Boilers
Calenders, Supercalenders, and Embossing Calenders
Cleaners L.D.and H.D.
Coaters
Corrugating
Deflakers and Refiners
Dewatering
Drum Reel Up
Drum Thickeners
Drying Cylinders
Finishing
Guillotines
Headboxes
Instrumentation
Laminators
Laboratory Equipment
Material Handling
Paper and Board Machines
Paper Machine Parts
Paper and Tissue Converting
Power / Electric Motors
Pulp Plant
Pumps
Ream Counters
Ream Wrappers
Roll Grinders
Roll Splitters
Screens
Screw Presses
Sheet Cutters
Size Presses
Stock Preparation Equipment
Sundries
Tissue Machines
Wanted
Winders and Rewinders
Wire and Felt Guides
 

Paper and Tissue Machine Parts

 

 Reference Description
190032 Voith CLUPAC system, year 1984, width of paper at pope reeler: 2520mm, speed maximum: 600 m/min, band width: 3000mm.
190031 Six pieces suction press rolls, width 3150mm, shell thickness 700mm, stainless steel shell, for paper machine width 2500mm.
190030

Granite rolls for presses:

1. Face 5360mm, diameter 995mm, centres 6020mm.

2. Face 3530mm, diameter 620mm, centres3820mm, one damaged end..

3. Face 3270mm, diameter 650mm.

4. Face 2890mm, diameter 555mm, centres 3390mm, slight damage to one edge.

5. Face 2670mm, diameter 630mm,no shaft.

6. Face 5080mm, diameter 975mm, slight damage to one edge.

190029

Jumbo Press: 1104mm diameter rolls, face width approximately 2750mm. 4 rolls including frames included. Right hand drive, paper width untrimmed on the pope reeler: 2500mm.

190028

Tissue converting parts:

PCMC 277omm rewinder, two PCMC log saws, two Perini log saws, Haysen 10 pack machine, Casmatic bundler and two core cutters.

190026 Suction couch roll: table width 3050mm, exterior diameter 740mm, material: bronze, press design 50kg/cm.
190025 Wire suction couch roll 3180mm, face width in total 3480mm, drive as seen from the headbox is on the right, diameter of shell 654mm.
190024

Bi-nip press section comprising:

roll diameter 750mm, table width 3150mm, blend drilled, press 60 kN/m,

roll diameter 750mm, table width 3150mm, Microrok, press 80 kN/m,

suction press diameter 840mm, table width 3150mm, diameter of holes: 3mm.

190023 Headbox: slice width 2950mm, maximum flow 33,700 l/min, concentration 0.9% - 1.2%. Installed 1994.
190022 Andritz wetlap twin wire press, year 1989, working width 2600mm, wire width 2750mm, working speed 6-30 m/min, capacity 90-180 t/day bone dry depending on freeness of furnish, inlet consistency 4.2% (groundwood pulp), outlet consistency 35% (groundwood pulp). Includes frames, rolls, drives and controls.
190020 Goristidi foils: vacuum type, 8 available. Year 1995.
190007 FOR ALL WATER RECOVERY,CLEANING AND FIBRE RECOVERY SEE  WWW.OMC-COLLAREDA.COM

Please contact us if there is an item you require which is not in our current list.

 
 
   
Home About us Products Enquiry Form Contact us