| Reference |
Description |
| 220104 |
Deinking
Plant;
Capacity 75-199
t/day, built by Black Clawson, Escher Wyess, year 1980,1995,1998.
Water consumption: 4.5 m3 / ton of pulp,energy consumption
500 KWh / ton, brightness after deinking; 80. |
| 220103 |
Complete pulp mill for sale: current
capacity 150,000 t/year of bleached sulphate kraft pulp.
DETAILS ON REQUEST. |
| 220102 |
Andritz 2-wire press, year 1996, width
2000mm, type DWP ED 2025HP, closed headbox design, includes
layboy, bale press and strapper / bander. |
| 220101 |
Lamort ST 8 CW pulper; year 1989,
volume 12 m3, motor 250 kw, 90 t/day capacity. |
| 220100 |
High consistency pulper; feeding belt
B + G PBF 1500. Year 1989, length 24.23m, horizontal length
15m, weight 1200 kg, motor power 7.5 kw. |
| 220099 |
PULP
MACHINE:
Stock preparation:
six centriscreens, five Jones DD 34", two Bauer
cleaners, two Celleco cleaners.
Pulp machin:
pulp grades and furnish, 100%bleached kraft sawdust
pulp. |
| 220098 |
PULP
PLANT:
Chip handling
equipment.
Chemical recovery
plant.
Three M&D
digesters
Bleach Plant
Pulp processing
equipment.
More details
on request. |
| 220097 |
Voith high density hydrapulper model
HD40 rated at 260 BDSTPD @12% consistency, 9.9375:1 rated
gearbox and 900 HP, 4160V, 1200 RPM motor. |
| 220096 |
Stock
prep de-ink line:
Lamort HC
pulper with Poire model 3, production 11t/hr, three
Lamort de- ink cells, Lamort SP vertical pressure screen
in three stages. Celleco LD cleaners. Washing by two
Kvaener drum washers. Three Thune screw presses model
SP45SL, two with gearbox drives and one with a hydraulic
drive. |
| 220095 |
Stock
prep de-ink line:
Lamort HC
pulper with Poire model 3, production 13t/hr, four Lamort
de- ink cells, Lamort CH screens primary and secondary,
with Lamort tertiary scrreen. Celleco LD cleaners.
Washing / thickening by four Holder Pamac drum thickeners. |
| 220094 |
Stock
prep de-ink line:
Lamort pulper
18 m3 H.C., production 16 t/hr, installed 1995, rejects
to a Lamort Poire model3. Two stage screening and tertiary
stage, Lamort screens CH5 in primary and secondary screening.
Two Kvaener
drum washers.
Two Andritz
belt presses.
Lamort LD
cleaners.
Two Kroftas:
one 14m diameter the other 18 m diameter. One Krofta
with sludge density control. |
| 220090 |
Helical pulper Lamort capacity 25
m3: tank stainless steel, without motor, installed 1990,
includes reducer. |
| 220089 |
Pulp
plant:
Clark and
Vicario stainless steel Deculator year 1979, for air
removal from stock, stainless steel LD cleaners of Richard
Berg manufacture. Stage 1: 47 cleaners nominal flow
28,000 litres/min. Stage 2: 10 cleaners . Stage 3: 2
cleaners. |
| 220088 |
Ahlstrom
Washer, year 1996, model DD3040.3 MCV, drum size: 3000mm
diameter x 4000mm length, area 37.7 m2, three washing
zones, feed: 8%-10%, hydraulic drive, 0-13 rpm,
discharge
screw, motor 11kw.
Three stage
washer with filtrate fractionation, vacuum system, filtrate
50 mg/litre, sealing water 80 litres/min, hydra drive
motor 90kW, weight 77,000 kg, productionm 100,000 t/year. |
| 220087 |
TMP
pulp line comprising: two Andritz/Sprout primary refiners,
350 t/day, 25,000HP, speed 1800 rpm and two secondary
refiners 22,000HP. Valmet refiner model RGP70CDX year
2001, Sunds reject refiner model CD70 with 1800 rpm
motor. Berg / Hymac RB LD stainless steel cleaners.
Pressure screens:
four primary and two secondary . Next stage screening
with two primary and two secondary screens. Two Thune
45SL presses. Five G.L.&V. sidehill slotted screens.
Bleaching plant with brightness sensors. |
| 220086 |
TMP
plant producing 900 t/day. Metso manufacture, year 1996.
Details
on request. |
| 220085 |
Two
Kvaener Hymac Inc. twin wire presses , 2160mm wide,
year 1997 and 1998.
One Andritz-Ruthner
twin wire press, 2160mm wide, year 1998. |
| 220084 |
Two paper
shredders: opening approximately 1 metre wide on each
unit. |
| 220082 |
CTMP plant: process and boiler. Details
on request. |
| 220081 |
Voith 12 DR pulper with spare gearbox. |
| 220080 |
Voith VAP 26 pulper, capacity 26 m3,
year 1983, stock consistency 4.5%. |
| 220079 |
Black Clawson pulper, all stainless
steel vat 24 m3, with rotor and 270 HP motor, includes
stock pump and conveyor, 3815mm diameter x 2765 mm height, |
| 220077 |
CTMP plant: Manufacturer Sunds Defibrator,
year 1986, capacity 330 t/day. |
| 220076 |
Allibe pulper, type B. |
| 220075 |
Two BCI pulpers, 20 ft, stainless
tub, Volkes rotors and gearbox drive. |
|
