| Reference |
Description |
| 300147 |
Two
Jagenberg synchro AS328 sheeters, year 1983 , nominal
trim width 2400mm, assorted board grades 175-700 gsm,
maximum machine speed (mechanical) 300 m/min, two motor-
drive, power supply: 3 phase , AC 415V, 50 cycles.
|
| 300146 |
Pizzolato
TRL 1700 cut to register sheeter: year 1995, web width
1700mm, working width 1600mm, knife load 500 gsm, mechanical
speed of cutter: 100 m/min,
sheet length:
minimum 400mm, maximum 1700mm,
two single
unwind stands with airshaft and RE pneumatic brake. |
| 300145 |
WILL A4 Line; model SLK 447, width
1900mm, jear 1977, speed 200 m/min, 5 roll shaftless unwinds,
roll diameter 1500mm, pneumatic brakes, hydraulic roll
lifts, six slitters, maximum nine pockets, synchro cut.
Further details on request. |
| 300144 |
Strachan and Hanshaw simplex sheeter,
model 1700, year 1988, speed 200 m/min, dead knife operation,
maximum knife load 500 gsm twin roll single Favalessa
model PBF shaftless floor pickup unwind, 1500 mm diameter,
variable roll widths to a maximum of approximately 3000
mm. |
| 300143 |
Bielomatic
folio sheeter model P1085/31-RS, year 1985, STU/B.
Working width
2100mm and maximum knife load 600 gsm.
Three double
reel back stands and a single stand all with floor pick-up,
each unit with own hydraulic pack, woth auto tension
control and lateral movement, normal operation with
two reels, maximum caoacity seven reels. D curling unit,
roll diameters 500 - 1350mm, maximum knife load 600
gsm. |
| 300142 |
Strecker Sheet Cutter Synchro SQS:
working width 1600mm, capacity approximately 60 t/day,
basis weight range 50 - 400 gsm, maximum speed 350 m/min. |
| 300141 |
Masson Scott sheet cutter, maximum
paper width 1780mm, maximum speed 180 m/min, motor power
22KW, dimensions: 7100mm W x 3830mm H x 28300mm L, unwinder
maximum reel diameter 1800mm, unwinder maximum reel width
2200mm. Includes unwind stand. |
| 300140 |
Jagenberg RQ18 sheet cutter, working
width 1900mm. Maximum speed 250 m/min., shaftless multiple
unwind for eight reels of 1250mm diameter cones, pneumatic
brakes and tension control, decurler, one overlap drop
type layboy, electric drive. Second overlap and layboy
for rejected sheets. |
| 300139 |
Strecker sheet cutter, working width
1400mm. Maximum speed 250 m/min., shaftless multiple unwind
for eight reels of 1250mm diameter cones, pneumatic brakes
and tension control, decurler, one overlap drop type layboy,
electric drive. |
| 300138 |
Lennox CSS-71" Model 10 cutter.
Year approximately 1984. Cut size range, 10.625",
11", 13", 14", 297mm, 420mm. Eight reams.
Paper roll width minimum 342, maximum 70". Paper
roll diameter 40". Core diameter 76mm, 3". Manual
air brakes. |
| 300137 |
Titan SR5 slitter rewinder: maximum
web width 1600mm, maximum unwind diameter 1000mm, maximum
rewind diameter 600mm, shafted unwind with reel lift ,
electronic edge guide, razor slitting, cantilevered side
frame, differential rewinds (quick locks). Year 1989. |
| 300136 |
Pasaban
duplex cross cutter, cutting width 2500mm, year 1972,
overhauled several times 1990-1998, speed 150 m/min,
grammage 220-600 gsm, length from 400 to 1800mm,
shaftless
unwinder adjustable with two drum brakes, single power
motors , reject gate, tension control. |
| 300135 |
Jagenberg
duplex cross cutter, cutting width 2500mm, year 1972,
overhauled several times 1990-1998, speed 150 m/min,
grammage 220-600 gsm, length from 400 to 2200mm,
shaftless
unwinder adjustable with two drum brakes, single power
motors , reject gate, tension control. |
| 300134 |
Pasaban
duplex cross cutter, cutting width 2500mm, year 1976,
overhauled several times 1990-1998, speed 150 m/min,
grammage 220-600 gsm, length from 400 to 1800mm,
shaftless
unwinder adjustable with two drum brakes, single power
motors , reject gate, tension control. |
| 300133 |
Pasaban
duplex cross cutter, cutting width 2500mm, year 1985,
overhauled several times 1990-1998, speed 150 m/min,
grammage 220-600 gsm, length from 400 to 2100mm,
shaftless
unwinder adjustable with two drum brakes, single power
motors , reject gate, tension control. |
| 300132 |
Jagenberg Synchrosprint, useful width
1600mm, grammage 75 - 160 gsm, length of sheets 600 -
1600mm, speed 330 m/min, maximum width of reel 1700mm,
year 2000. |
| 300131 |
Jagenberg Convo 16 sheeter, year 1985,
usable width 1400mm, cut off lengths 600 - 1600mm, speed
250 m/min, maximum weight of the reel 1350kg. |
| 300129 |
Ech Will Cut Size Line, year 1990,
production 80-160 gsm copier paper, web width 2330mm,
five shaftless floor pick-up unwind stands, twelve slitters,
design speed 350 m/min. |
| 300128 |
Jagenberg SY 116 synchro sheeter,
year 1988, web width 1600mm, sheet length 450- 1600mm,
shaftless floor pick-up unwind stands, four slitters. |
| 300127 |
Ech Will model FFS Folio synchro sheeter
with in-line Pemco wrapper. Web width 1950mm, dual slitter
stations, sheet length 500 - 1270mm, design speed 300
m/min. |
| 300125 |
Pizzolato
TS-6 sheet cutter, year 2002, working width 1650mm,
operating
speed maximum 300 m/min,
maximum capacity
625 kg/hr, basis weight range 80-500gsm, unwind diameter
1250mm. |
| 300124 |
Strachan and Henshaw sheeter : width
1700mm, year 1981, twin reel shaftless unwinds with air
brakes and tension control, maximum roll dameter 1300mm,
maximum reel weight 1500kg, core size 76 and 152mm diameter,
dead knife cutting, three slitters, ream counter and taber,
cutting to register and dead band sheeting, tape overlay
to chain pile layboy. |
| 300122 |
Jagenberg Vari Top slitter winder
, maximum reel width 4300mm, maximum reel diameter 1500mm,
maximum speed 2200 m/min, maximum three rolls per throw. |
| 300121 |
A3/A4 cut size line: 7 pockets, working
width 1470mm, capacity 1500 A4 reams/hour., speed 120-130
m/min. |
| 300119 |
Strachan and Henshaw SH1700 sheeter,
new check rolls, new reduction gearbox, new 8 reels unwinds
with solid shafts, 4 H-type unwinds with air shafts, main
motor rewound, slitters reground, hydraulics overhauled,
electric panel overhauled. |
| 300118 |
Jagenberg Convo sheeter, web width
1400mm, Atlas vertical shaftless lift unwind stand, unwind
diameter 1200mm, splice unit, decurl unit, single flyknife
cut-off, pallet layboy. |
| 300117 |
Marquip duplex synchro sheeter, model
111L, year installed 1997/1998, useul width 2450mm, speed
maximum 250-300 m/min, coated boards from 200 to 2000gsm,
capacity 100 t/day. |
| 300116 |
Jagenberg
simplex synchro sheeter, model RGS/GI , installed 1969,
220/380 V, 50 cycles, useful width 2400mm, length from
600-1800mm.
Speed at
600mm: 80m/min, speed at 650mm: 105 m/min, speed at
700mm: 128 m/min.
Coated boards
from 200-700gsm, reject gate, two shaftless unwinds. |
| 300114 |
Pasaban
synchro sheet cutter, width 1600mm, two unwinds without
shaft, automatic brakes,reject system,automatic pallet
change, regular speed 200 m/min, rebuilt by Pasaban
in 2005. |
| 300113 |
Valmet CTS 1450 sheet cutter, year
2003, maximum paper width 1450mm, maximum sheet length
1500mm, minimum sheet length 400mm, slitting knives: three
stations, maximum reel diameter: top 1550mm (just one
roll on top) or 1250mm on top and bottom shafts. Speed
300m/min, pallet height: 1200mm with pallet, maximum pallet
weight: 2000kg. |
| 300111 |
Jagenberg sheeter: synchro AS16, year
1980, 8 roll shaftless unwind, crane loaded reels, disc
brakes with tension control, edge guide, de-curling unit,
three sllitters, reject gate, ream counter and tabers,
auto pallet changeover. |
| 300110 |
Jagenberg sheeter: synchro AS16, year
1979, 8 roll shaftless unwind, crane loaded reels, disc
brakes with tension control, edge guide, de-curling unit,
three sllitters, reject gate, ream counter and tabers,
auto pallet changeover. |
| 300109 |
Jagenberg sheeter: synchro AS16, 430-1600mm
width, speed 250 m/min, sheet length 550-2000mm, year
1999, rebuilt 2006, two x 8 roll shaftless unwinds with
crane roll loading, disc brakes with tension control,
edge guide, de-curling unit, three sllitters, reject gate,
220v, ream counter and taber, auto pallet changeover. |
| 300108 |
Masson Scott DR3W sheeter, synchro
cut, year 1979, six shaftless unwind stands, four slitters,
reject gate, roll diameter: maximum 1500mm, width 1480mm,
maximum knife load 500gsm. |
| 300101 |
Jagenberg Synchro AS 116, year 1982,
width 1800mm, maximum speed 300 m/min, paper grammage
50-125 gsm, production 169 tons/day. |
| 300095 |
Jagenberg cutter, useful width 1600mm,
two shaftless unwinds with load system, maximum diameter
1600mm, three pneumatic length cutting, automatic change
system, control cutting from panel desk. |
| 300094 |
Jagenberg synchro model Short 16,
year 1975, width 2200mm, speed 250 m/min, reject system,
one unwind (pope). |
| 300089 |
Two Copasa sheet cutters width 1300mm
and 1500mm, year 1988. Shaftless unwind maximum diameter
2200mm, sheet length from 400 - 1400mm, dead knife. Three
blades. |
| 300088 |
Strecker Bruderhaus SKA dead / fly
sheet cutter, year 1980, sheet length range 400-1000mm,
maximum sheet width: 1200mm, maximum cutting speed 300
m/min. |
| 300087 |
Masson Scott sheet cutter, maximum
paper width 1780mm, maximum machine speed 180 m/min, motor
power 22 KW, maximum unwinder reel diameter 1800mm, maximum
unwinder reel width 2200mm, basis range 100-700 gsm, minimum
cut length 430mm, maximum cut length 2160mm, 4 slitters,
single rotary knife. |
| 300086 |
Jagenberg duplex sheet cutter useful
width 2400mm, six unwinds with shaft, speed 120 m/min. |
| 300085 |
Pasaban dead knife sheet cutter working
width 1500mm, three blades, sheet capacity from 400mm
- 1400mm, maximum basis weight 600 gsm, maximum speed
200 m/min. |
|
